About AMMMun4389

This author has not yet filled in any details.
So far AMMMun4389 has created 159 blog entries.

December 2017

MTA AND FACTORY 2050 AT THE AMRC PARTNER FOR EXCITING INDUSTRY 4.0 FEATURE FOR MACH 2018

By | December 5th, 2017|MACH 2018, Uncategorised|

Low cost automation can revolutionise SMEs’ businesses. The Manufacturing Technologies Association and the University of Sheffield Advanced Manufacturing Research Centre (AMRC) have partnered to put together a unique feature to demonstrate cost-effective adaption of Industry 4.0 Technologies at MACH 2018. MACH 2018 is the place to discover new technologies that shape the world we live in. The AMRC’s Factory 2050 is the UK’s first state-of-the-art factory entirely dedicated to conducting collaborative research into digital assembly and flexible component manufacturing. The two are staging a joint showcase of cost-effective solutions for [...]

AP&T Metal-Forming Bulletin – December 2017

By | December 5th, 2017|Press Tooling, Uncategorised|

AP&T receives 2017 Quality Innovation Award  AP&T, which is headquartered in Ulricehamn, Sweden, has received yet another prestigious award for its unique production solution for the forming of high-strength aluminum. The 2017 Quality Innovation Award was conferred by SIQ — Swedish Institute for Quality.  » READ MORE AP&T part of cooperation project regarding sensors used during hot forming of high-strength aluminium  The car, aviation and space industries increasingly require stronger and lighter components which can contribute to more energy-efficient utilization and a higher degree of safety. To meet these requirements, [...]

Fibre Laser Cuts Five Times Faster Than C02 Laser

By | December 5th, 2017|Laser Cutting, Uncategorised|

The Nukon Rex installed at Ambar Kelly in Hertfordshire has already exceeded their expectations. Higher speed has meant faster production times and cutting with compressed air has reduced gas costs. 'The Nukon Rex machine is five times faster than our old CO2 laser machine.  The Nukon fibre laser is cutting with compressed air at 9 bar with a perfect clean cut and has resulted in huge cost savings as we no longer require nitrogen and oxygen.  The service and support received from Nukon UK & MTL Engineering has been first class.'  Alex Bardett, M.D. of [...]

One Brand: A World of Resources

By | December 5th, 2017|Press Tooling, Uncategorised|

Welcome to Nidec Press and Automation. By combining the expertise, experience and resources of industry leaders in the material forming market, Nidec Press and Automation has established a single source solution for machinery, services and technology. The Nidec Press and Automation brand brings together Minster, Arisa, Kyori and Vamco products to the market, allowing combined synergies to offer efficient, cost-effective and timely solutions to manufactures looking for increased production and profits. With more than 125 years of manufacturing experience, Nidec Minster offers mid-range tonnage presses and related automation equipment with [...]

Member Feature – Worlifts

By | December 5th, 2017|Featured Member|

So, tell us about the company and its origins. General History Back in the early 1970’s, our founder Mr,Sam Worley was the works manager for a local hydraulic jack manufacturer. His employment and future with the company was not going in the direction promised. Sam made a decision to start a company with the support of one other local business. Around 1973-1975 the company was trading under the name of Worley Hydraulics and the companies main activity was the manufacture and distribution of a range of hydraulic jacks and hydraulic cylinders along with the [...]

Agility

By | December 5th, 2017|Uncategorised|

- Most Fires Are Preventable -  Providing Annual Fire Safety Training for Your Staff is Important, But Have You Considered a Fire Risk Assessment for Your Premises. For More Information Visit Our Website or Enquire Below. Enquire Today about a FIRE Risk Assessment      

MACH 2018 Exhibition – Visitor Registration Now Open

By | December 5th, 2017|MACH 2018, Uncategorised|

With just a few months to go before the doors open to MACH 2018 at the NEC in Birmingham, the team behind the exhibition are delighted to announce that visitor registration is now live. MACH 2018 takes place from the 9th to the 13th April 2018 and will be located in a new home on the atrium side of the NEC, in Halls 17, 18, 19, 20, 6 and 7. This is the first move of the show since relocating to the NEC when it first opened in 1976, and [...]

AP&T Metal-Forming Bulletin – October 2017

By | December 5th, 2017|Press Tooling, Uncategorised|

AP&T presents its latest sensation for the first time at well-attended event in Ulricehamn On October 4 and 5, around 70 representatives from different parts of the global car industry gathered at AP&T in Ulricehamn. The program included the unveiling of two new sensations that enable lighter, safer and more energy efficient cars to be manufactured. Both of AP&T’s new innovations — process technology for forming high-strength aluminum and the company’s new servo hydraulic press — are setting a new standard in the industry. » READ MORE   Globally unique [...]

£1m+ machine investment proves just ‘Mint’ for the new pound coin

By | December 5th, 2017|Press Tooling, Uncategorised|

A UK-based supplier of high quality punching technology is playing a crucial role in the production of the new £1 coin. Bruderer UK, which has nearly 50 years’ experience creating world renown precision high speed presses, has installed a state-of-the-art machine into the Royal Mint’s Llantrisant facility, giving the world famous institution additional speed, capacity and flexibility. Capable of up to 825 strokes per minute, the BSTA 1600-117B2 is responsible for creating the hard cut blanks that form one of the first processes in the manufacture of the new ‘Pound’ [...]

November 2017

Decade new 3000 TON capacity load cells.

By | November 8th, 2017|Uncategorised|

Decade has upped its load cell capacity to 3000 tons for press calibrations! Weather you need your press load tested or load monitor calibrated we can cater for all capacities.